ÄÐֱͬ²¥

Product Calculator
PRODUCT CALCULATOR
close
SELECT A MATERIAL
DIMENSIONS


YOU WILL NEED:
DOWNLOAD RESOURCES
Asphalt

Materials from ÄÐֱͬ²¥ meets the necessary standards for your project and our award-winning facilities are staffed by experienced personnel who monitor the production of all materials.

ÄÐֱͬ²¥ asphalt products are createdÌýwith the needs of contractors in mind. Our experience working with various asphalt products and our commitment to createÌýproducts better, faster and safelyÌýallow us toÌýprovide a full list of asphalt solutions for any project.

SURFACE/WEARING
4.75mm
– Nominal maximum aggregate size is a promising, low-cost asphalt mixture. This mix, when applied as a thin layer, has the potential to provide a very smooth riding surface and correct surface defects.

9.5 and 12.5mm – Surface mixes usually consist of a smaller maximum aggregate size (9.5 or 3/8″ / 12.5mm or 1/2″). Wearing/surface mixes are designed to provide a smoother riding surface and to seal the surface from water penetration.

BINDER/BASE
19mm
–ÌýConsists of one or more lifts of structural HMA place below the surface layers, distributing traffic loads preventing deformation in the pavement foundation.

25mm –ÌýThis layer in the pavement system sits immediate below the wearing course, or binder course if used. Consisting of a larger maximum aggregate size (25mm or 1″), base course provides a strong foundation for the wearing course.

SPECIALIZED MIXES
Gap Graded/SMA
–ÌýUsed exclusively as a wearing course, Gap Graded mixes are used for paving of heavy traffic areas where rutting and fatigue cracking are concerns. Gap Graded mixes, or Stone Matrix Asphalt, have a relatively high binder content to provide good durability.

P-401/Airport –ÌýDesign specifically used on FAA and Airfield pavement projects. This mix is intended for use in construction of runways, taxiways and apron projects.

Permeable Asphalt Treated Base – A range of sustainable materials used for the movement of storm water through the surface in addition to reduce runoff. Examples include roads, paths, car parking lots, cycle paths and airport shoulders.

MISCELLANEOUS
Coldpatch
– A cost effect repair for driveways, sidewalks and parking lots. Coldpatch can also be used for manhole maintenance and temporary patching for utility projects.

Tackcoat –ÌýThin layers of asphalt that are used in construction or refacing of driveways, roads and highways. This type of product is used to help the layers of asphalt laid down to bond together with fore efficiency.

Ìý

(0) Results Found
PRODUCT CALCULATOR
close
SELECT A MATERIAL
DIMENSIONS


YOU WILL NEED: